The multi-valve controlled fully automatic water softener uses a dedicated flow-type controller to operate multiple diaphragm valves, achieving modular control of the equipment. This greatly simplifies the system's control procedures. The controller's settings and operation do not require a professional engineer, essentially realizing a "fool-proof" operation of the equipment.
The multi-valve fully automatic water softener does not require dedicated personnel for supervision, significantly reducing equipment operation failures caused by human factors. On-site, only periodic salt replenishment in the salt tank is needed to maintain stable operation of the equipment.
Process Description
Multi-Valve System Water Softener Configuration Table
| No. | Model | Water Production Capacity t/h | Control Method | Installation Dimensions mm | Inlet/Outlet Pipe Diameter |
| 1 | JY-T-750 | 8--12 | Single Tank Time Control | 2000*1000*2400 | DN40 |
| 2 | JY-T-900 | 12--20 | 2300*1500*2700 | DN50 |
| 3 | JY-T-1200 | 20--30 | 2880*2000*2700 | DN65 |
| 4 | JY-T-1500 | 30--50 | 3600*2200*2700 | DN80 |
| 5 | JY-T-1800 | 50--75 | 4000*2600*3000 | DN100 |
| 6 | JY-F-750 | 8--12 | Single Tank Flow Control | 2000*1000*2400 | DN40 |
| 7 | JY-F-900 | 12--20 | 2300*1500*2700 | DN50 |
| 8 | JY-F-1200 | 20--30 | 2880*2000*2700 | DN65 |
| 9 | JY-F-1500 | 30--50 | 3600*2200*2700 | DN80 |
| 10 | JY-F-1800 | 50--75 | 4000*2600*3000 | DN100 |